Car Brands
- Acura
- Audi
- BMW
- Buick
- Cadillac
- Chevrolet
- Chrysler
- Dodge
- Fiat
- Ford
- GMC
- Honda
- Hummer
- Hyundai
- Infiniti
- Isuzu
- Jaguar
- Jeep
- Kia
- Land Rover
- Lexus
- Lincoln
- Maserati
- Mazda
- Mercedes Benz
- Mercury
- Mini Cooper
- Mitsubishi
- Nissan
- Oldsmobile
- Pontiac
- Porsche
- RAM
- Saab
- Saturn
- Scion
- Smart
- Sprinter
- Subaru
- Suzuki
- Tesla
- Toyota
- Volkswagen
- Volvo
Explore Additional Products
PLAID Letter Badge Emblem | Premium Alloy | 3M Adhesive | 4 Finishes Available
SKU: TSL4702-glossy balck- Description
- Shipping and Refund
Showcase your performance credentials with our premium PLAID letter badge emblem. Crafted from durable alloy with your choice of four stunning finishes, this high-quality emblem adds a sporty, exclusive touch to your vehicle—celebrating the ultimate in electric performance with the iconic PLAID designation that represents Tesla's fastest, most powerful models.
Choose Your Finish:
- Glossy Black: Deep, reflective black finish—sleek and sophisticated appearance
- Matte Black: Non-reflective black finish—stealthy, murdered-out aesthetic
- Red: Bold red finish—sporty, high-performance look
- Silver: Classic metallic silver—timeless, elegant appearance
Why Choose This PLAID Badge?
- Premium Alloy Construction: Made from high-quality metal alloy—strong, durable, and resistant to fading, cracking, or peeling unlike cheap plastic badges.
- Performance Statement: PLAID designation represents Tesla's ultimate performance tier—showcases your vehicle's elite status and incredible capabilities.
- Bright, Vibrant Colors: Professional-grade finish maintains brilliant color and shine—won't fade from sun exposure or car washes.
- 3M Automotive Adhesive: Industrial-strength 3M adhesive backing ensures permanent bond—won't fall off during rain, car washes, or extreme weather.
- Easy Peel-and-Stick Installation: Simple installation in seconds—no tools, drilling, or modifications required, completely reversible.
- Weather-Resistant Design: Withstands rain, snow, sun, and temperature extremes—maintains appearance and adhesion in all conditions.
- Stylish & Dynamic Appearance: Adds sporty, performance-oriented aesthetic to your vehicle—enhances overall look with minimal investment.
- Universal Placement: Apply anywhere on flat surfaces—fenders, trunk, doors, interior trim, or dashboard.
- OEM-Quality Finish: Professional appearance that looks factory-installed—premium alternative to expensive dealer badges.
- Universal Compatibility: Perfect for Model 3, Y, S, X, and even Cybertruck—works on any vehicle you want to customize.
Perfect Placement Ideas:
- 🚗 Rear fenders (classic performance badge location)
- 🎯 Trunk lid or liftgate
- 🚪 Front fenders
- 📱 Dashboard or center console
- 🪟 Door sills or B-pillars
- 🎨 Interior trim panels
- ⚡ Charging port door
- 🔧 Frunk lid
Complete Your Performance Look
Build a cohesive performance aesthetic with these complementary upgrades:
- Real Carbon Fiber Mirror Covers - Performance styling
- Chrome Delete Kit for Model 3 - Blacked-out appearance
- Real Carbon Fiber Rear Spoiler - Aggressive stance
- Performance Wheel Center Cap Covers - Complete the look
Product Specifications:
- Type: PLAID letter badge emblem
- Material: Premium metal alloy (durable and fade-resistant)
- Finish Options: Glossy Black, Matte Black, Red, or Silver
- Adhesive: 3M automotive-grade adhesive backing
- Installation: Peel-and-stick (no tools required)
- Weather Resistance: All-weather rated (rain, snow, sun)
- Durability: Fade-resistant, crack-resistant, peel-resistant
- Appearance: Bright colors, stylish and dynamic
- Compatibility: Universal—Model 3, Y, S, X, Cybertruck, any vehicle
- Placement: Any flat surface (exterior or interior)
- Removability: Can be removed if desired (adhesive is strong but removable)
Installation Guide:
Surface Preparation (Critical for Best Results):
- Choose flat, smooth placement location (avoid curved surfaces)
- Clean surface thoroughly with isopropyl alcohol (70%+)
- Ensure surface is completely dry and free of dust, oil, wax, or moisture
- Work in moderate temperature (60-80°F / 15-27°C) for best adhesion
Installation Steps:
- Test fit badge position before removing adhesive backing
- Mark placement with painter's tape if desired for perfect alignment
- Peel off adhesive backing carefully
- Align badge with desired position
- Press firmly in center, then work outward to edges
- Apply firm, even pressure across entire badge for 30 seconds
- Press edges firmly to ensure complete contact
- Allow adhesive to cure for 24 hours before car wash or rain exposure
Installation Time: Less than 5 minutes. No tools required.
Package Includes:
- 1x PLAID Letter Badge Emblem (finish as selected)
- Pre-applied 3M adhesive backing
- Installation instructions
Care & Maintenance:
- Wait 24 hours after installation before washing vehicle
- Hand wash recommended for first few weeks
- Avoid high-pressure washers directly on badge edges
- Use pH-neutral car wash soap
- Dry with microfiber towel to prevent water spots
- Inspect adhesion periodically, especially after extreme weather
- The alloy construction won't fade or degrade like plastic badges
Pro Tips for Best Results:
- Clean surface twice—once with soap, then again with isopropyl alcohol
- Work in shade or garage to avoid direct sunlight heating adhesive
- Use painter's tape to mark exact position before applying
- Press firmly for full 30 seconds—proper pressure ensures strong bond
- Avoid touching adhesive side with fingers (oils reduce adhesion)
- Popular placement: rear fenders matching OEM performance badge location
- Consider multiple badges for symmetrical placement on both sides
- The matte black finish pairs perfectly with chrome delete modifications
Removal Instructions (If Needed):
- Warm badge with heat gun or hair dryer on LOW setting
- Gently peel from one corner, applying heat as you go
- Pull slowly at 45-degree angle to avoid surface damage
- Remove any adhesive residue with isopropyl alcohol or adhesive remover
- Surface should be undamaged and ready for new badge if desired
What Does PLAID Mean?
PLAID is Tesla's designation for their highest-performance powertrain configuration, representing:
- ⚡ Tri-motor all-wheel drive (three independent motors)
- 🚀 0-60 mph in under 2 seconds (Model S Plaid)
- 💨 Over 1,000 horsepower
- 🏁 Top speeds exceeding 200 mph
- 🎯 Ultimate performance and acceleration
- 👑 Flagship tier above Long Range and Performance variants
Advantages of This Badge:
- ✓ Premium alloy construction (vs. cheap plastic)
- ✓ 4 finish options (match your aesthetic)
- ✓ 3M adhesive (industrial-strength bond)
- ✓ Fade-resistant (maintains color and shine)
- ✓ Weather-resistant (all-season durability)
- ✓ Easy installation (peel-and-stick simplicity)
- ✓ OEM-quality appearance (looks factory-installed)
- ✓ Universal compatibility (any vehicle, any location)
- ✓ Affordable upgrade (premium look, minimal cost)
Quality Guarantee: Backed by our 30-day satisfaction guarantee. If you experience any issues with quality or adhesion, we'll make it right.
Celebrate ultimate performance with the iconic PLAID badge. Select your preferred finish and add to cart for a premium, sporty upgrade that showcases your vehicle's elite status.
SHIPPING:
ORDER PROCESSING: Please allow 1-2 Days to process your order. Expect an email within 1-2 Days to let you know your order is on the way!
-
STORE PICKUP - [10040 Arlington Ave. Ste A Riverside, CA 92503 ]
Orders can be picked up daily, from [1.00pm to 3.00pm]. An email will be sent when your order is ready for pickup. - During checkout, enter your address and choose the ship option. Click the "continue to shipping" button.
- When your order is ready for delivery, you will receive an email with real-time tracking information.
- DOMESTIC/INTERNATIONAL SHIPPING RATES AND ESTIMATES: For calculated shipping rates: Shipping charges for your order will be calculated and displayed at checkout.
- INTERNATIONAL SHIPPING: Your order may be subject to import duties and taxes (including VAT), which are incurred once a shipment reaches your destination country. Best Key Solution is not responsible for these charges if they are applied and are your responsibility as the customer.
RETURN AND REFUND
- We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
- To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
- To start a return, you can contact us at info@bestkeysolution.com. Please note that returns will need to be sent to the following address: [10040 Arlington Ave. Ste A, Riverside CA 92503 USA]
- If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
- You can always contact us for any return question at info@bestkeysolution.com
Damages and issues: Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items: Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges: The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
European Union 14 day cooling off period: Notwithstanding the above, if the merchandise is being shipped into the European Union, you have the right to cancel or return your order within 14 days, for any reason and without a justification. As above, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
Refunds: We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at info@bestkeysolution.com.
