KEY2U - 4 Button Keyless Entry Remote Control Car Key Fob Replacement for OHT692427AA OHT692713AA (Pack of 2) Key

Product Description:

Every Key Fob comes complete with new Batteries and had been tested before shipping to ensure that is working well.

Product Detail:

Integrated Chip: PCF7941A / Hitag 2 / 46 Chip

FCC ID: OHT692427AA

Frequency: 315Mhz.

Battery: CR2032

Button: Lock, Unlock, Trunk, Panic

Brand: KEY2U

Suitable for Car Key Fob That Use FCC ID: OHT692427AA, OHT692713AA  4 button:

2011-2014 Chrysler 200

2005-2007 Chrysler 300

2007-2009 Chrysler Aspen

2006-2010 Chrysler PT Cruiser

2007-2009 Chrysler Sebring

2008-2014 Dodge Avenger

2007-2012 Dodge Caliber

2005-2007 Dodge Charger

2005-2011 Dodge Dakota W/Transponder

2004-2009 Dodge Durango W/Transponder

2005-2007 Dodge Magnum

2007-2011 Dodge Nitro

2006-2009 Dodge Ram W/Transponder

2006-2007 Jeep Commander

2007-2016 Jeep Compass

2005-2007 Jeep Grand Cherokee

2008-2012 Jeep Liberty

2007-2018 Jeep Patriot

2006-2017 Jeep Wrangler

2006-2007 Mitsubishi Raider W/Transponder

How to Program your Key Fob Replacement:

2 Working Key are needed:

1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn Ignition to OFF and remove key.

2. Within 15 seconds of removing 1st key insert 2nd original working key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the Immobilizer warning Red Dot lamp illuminate on the dash and you will hear an audible tone. Turn ignition OFF and remove the key.

3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming is completed.

4. For each additional key you must repeat these steps starting with step number 1.

The Key Blade will need to be Cut by Automotive Locksmith, Cheaper than Dealer. 

If you only have 1 working key, you need to go to a local Automotive Locksmith to get the keys programmed with a programming tool