KEY2U - Keyless Entry Remote Control Car Key Fob Replacement for OHT692427AA KOBDT04A (Pack of 2) Key
Every Remote Key Fob comes complete with new batteries and had been tested before shipping to ensure that is working well.
Product Detail:
Integrated Chip: PCF7941A / Hitag 2 / 46 Chip
FCC ID: OHT692427AA
Frequency: 315Mhz.
Battery: CR2032
Reusable: No
Brand: KEY2U
Suitable for car key fob That Use FCC ID: OHT692427AA, OHT692713AA, KOBDT04A 3 button:
2011-2014 Chrysler 200
2005-2007 Chrysler 300
2007-2009 Chrysler Aspen
2006-2010 Chrysler PT Cruiser
2007-2009 Chrysler Sebring
2008-2014 Dodge Avenger
2007-2012 Dodge Caliber
2005-2007 Dodge Charger
2005-2013 Dodge Dakota W/Transponder
2004-2003 Dodge Durango W/Transponder
2005-2007 Dodge Magnum
2007-2011 Dodge Nitro
2006-2009 Dodge Ram W/Transponder
2006-2007 Jeep Commander
2007-2016 Jeep Compass
2005-2007 Jeep Grand Cherokee
2008-2012 Liberty
2006-2007 Mitsubishi Raider W/Transponder
2007-2018 Patriot
2006-2017 Wrangler
How to Program your Key Fob Replacement, 2 Working Key are needed:
1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn Ignition to OFF and remove key.
2. Within 15 seconds of removing 1st key insert 2nd original working key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the Immobilizer warning Red Dot lamp illuminate on the dash and you will hear an audible tone. Turn ignition OFF and remove the key.
3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming is completed.
4. For each additional key you must repeat these steps starting with step number 1.
The Key Blade will need to be Cut by Automotive Locksmith, Cheaper than Dealer.
If you only have 1 working key, you need to go to a Local Automotive Locksmith to get the key programmed with a programming tool.
Tabs Content